Responsive image
Responsive image

DAS100

High-speed Pneumatic Dual Action Sander

The PushCorp DAS100 is an ideal solution for light duty robotic sanding. The DA Sander features a replaceable 1/4 Hp (179 W) pneumatic motor. The DA Sander is a perfect entry level product to assist you in automating your sanding applications.

The DAS100 is designed to mount directly on the PushCorp AFD310/70 Series Compliant Force Devices.

The DAS100 is available with the following orbits: 3/8", 3/16", or 3/32". The 3/8" orbit will allow for the most aggressive sanding while the 3/32" orbit is better suited for applications where a fine finish is required. Additionally, either a 3", 3½", 5", or 6" backing pad may be used. Reference the Drop In Motors chart below to select the unit that best fits.

DAS100

Drop In Motors

Orbit Diameter 3"-3½" Disk 5" Disk 6" Disk
3/8" N/A ASM02895 ASM02909
3/16" ASM02907 ASM02904 ASM02910
3/32" ASM02908 ASM02905 ASM02911

Tool Specifications

Power:0.24 hp [179 W]
Speed Range:60-10,500 RPM
Tool Weight:4.0 Lb [1.81 kg]
Supply Air:90 psi (6.2 bar) Maximum
Airflow Rate:17 SCFM (481 LPM)
Recommended Airline Size Min:3/8 in (10 mm)
Recommended Hose Length Max:25 feet (8 meters)
Specifications subject to change without notice.

Mounting Configurations

Single DA Mount

Dual DA Mount