Responsive image
Responsive image

STC1515

High Speed Servo Toolholder

The PushCorp STC1515 High Speed Servo Toolholder has the highest rotational speed of any of our Toolholding Servo Motors.  The 15,000 rpm STC1515 has a powerful 15 hp (11.2 kW) Servo Motor with integral tool clamping to perform grinding, drilling, and machining operations with ease.

The STC1515 is designed to use standard BT30 Toolholders.  This makes a very wide variety of machine tools available for use.  The keyed shaft also prevents the Toolholder from slipping allowing full torque to be applied.

The STC1515 is designed to be mounted on the PushCorp AFD1100/80 Series Compliant Force Devices.  The STC1515 may also be rigidly mounted directly to a hi-capacity robot with no compliant device, providing a low cost six axis machining center with a large work volume.

STC1515

Features

  • 15 horsepower (11.2 kW) servo motor (Liquid Cooling Required)
  • 15,000 maximum RPM (Reversible)
  • Fully adjustable and reversible speed
  • Uses standard BT30 Toolholders
  • Sealed ceramic bearings for long service life
  • PushCorp proprietary high-speed shaft seal
  • Mounts directly to PushCorp Active and Passive compliant tools
  • Fail-safe pneumatic Toolholder release
  • ± 2% speed regulation
  • All fittings, fasteners, and threaded holes are METRIC

Tool Specifications
Power: 15.0 hp [11.2 kW]
Continuous Stall Torque: 7.4 lb.-ft. [10 N·m]
Speed Range:0-15,000 RPM
Supply Voltage:480VAC, 3-phase
Speed Regulation:±2% [Reversible]
Tool Weight:65 lb. (29.5 kg) Dry
Collet Specifications
Required Toolholder:BT30
Clamping Supply Air: Dry, Non-lubricated
90 psi [6.2 bar] Minimum
100 psi [6.9 bar] Maximum
Specifications subject to change without notice.

Mounting Configurations