RBS5100 Series

Robotic Belt Sander

The PushCorp RBS5100 Robotic Belt Sander is an ideal solution for belt sanding applications. It features a 100 inch long belt for long, continuous sanding applications. The RBS5100 has been designed from the ground up as a heavy-duty belt sanding unit with many unique features. The RBS5100 may be used to sand in three different ways - on its large steel platen, on the 7 inch (178 mm) contact wheel - specified at the time of purchase, or in the slack area of the belt media.

Two important features of the RBS5100 Robotic Belt Sander are the high-torque servo motor and timing belt drive. The timing belt drive system provides a 1.2:1 reduction for increased power. The Robotic Belt Sander also includes pneumatic belt media tensioning and electronic belt media tracking to enable safe, remote operation.

The RBS5100 is designed to mount on the AFD1240 and AFD92 force compliance devices. It may also be ordered with an optional stand with built-in force compliance. This turns the RBS5100 into a passive backstand with a platen. The AFD stand includes a table-top AFD81 and a control box, which houses the amplifier and controls for the RBS5100’s motor and tracking actuator.

Request a Quote

Key Features

Accurate belt media speed control

Standard 5″x 100″ belt media

3 Sanding positions, Platen, Contact Wheel, & Slack Area

Remote belt media tracking

Remote belt media tensioning

All fittings, fasteners, and threaded holes are METRIC

Specifications

Model	RBS5100 Series
Belt Width	5
Belt Length	100
Contact Wheel Diameter	7
Servo Motor Power	16.5 hp [12.3 kW]
Continuous Stall Torque	24.9 lb.-ft [33.8 N·m] @ Drive Wheel
Maximum Belt Speed	6374 SFPM
Weight	165 lbs. [74.8 kg]
Supply Air	Dry, 5µm Filtered, Non-lubricated, 80 psi [5.5 bar] min.